Tuesday, May 11, 2021

Florida’s Leading Dock Seal, Dock Shelter Distributor and Service Provider


Loading docks are the busiest areas in distribution centers, food and beverage plants, industrial factories, manufacturing facilities, retail outlets, and warehouses.

 
Gaps between parked vehicles and loading docks allow outside elements such as dust, rain, snow, and wind to enter a facility and also permit air conditioning and heating to escape, increasing energy cost. Dock seals and dock shelters offer ultimate sealing efficiency and protect the loading dock area against outdoor elements.
 
American Roll-Up Door Co., a division of DuraServ, supplies and services Serco’s dock seals, dock shelters, dock seals options, and inflatables for loading dock systems in Altamonte Springs, Apopka, Bradenton, Doctor Phillips, Fernandina Beach, Gainesville, Jacksonville, Kissimmee, Lakeland, Lake City, Orlando, Sanford, Sarasota, St. Augustine, St. Petersburg, Tampa, FL, and surrounding areas.
 
Call American Roll-Up Door Co. or connect with us online to choose the ideal dock seals and shelters for your loading dock systems.

Jacksonville, FL(904) 695‐0950
Orlando, FL(407) 857‐2427
Tampa, FL(813) 643‐7000
 

Dock Seals, Dock Shelters, and Installation Services

Dock seals and shelters provide optimum sealing effectiveness and safeguard the loading dock area from outdoor elements.
 

Dock Seals

Dock seals are foam pads that compress when trailers back into them, forming a seal around three sides of a trailer. Serco's dock seals are effective solutions to accommodate the loading dock's high volume traffic with consistent trailer widths and differing heights.
 
 

Dock Shelters

Dock shelters are enclosures that provide a wiper seal against trailer tops and sides for high sealing efficiency. They offer reliable performance and protection to withstand compression when a trailer backs up to the dock. Serco's dock shelters accommodate high-volume traffic with a wide variety of vehicle sizes and types.

 

Dock Seal Options

Dry dock system shields a loading dock area from external moisture with no required maintenance.
 
  • Serco S900DD Dry Dock System
 

Inflatables

Serco inflatable dock seals and shelters provide a tight seal for climate-controlled loading docks.
 
 

Benefits of Dock Seals and Shelters

  • Increase Productivity
  • Increase Loading Dock Door Lifespan
  • Protection Against Outdoor Elements
  • Safer Working Environment
 

Florida’s Most Trusted Dock Seals and Shelters Distributor and Service Provider

 
For over 35 years, American Roll-Up Door Co., a division of DuraServ, has installed, sold, and serviced Serco’s loading dock equipment, and accessories in Altamonte Springs, Apopka, Bradenton, Doctor Phillips, Fernandina Beach, Gainesville, Jacksonville, Kissimmee, Lakeland, Lake City, Orlando, Sanford, Sarasota, St. Augustine, St. Petersburg, Tampa, FL, and surrounding areas. 
 
The American Roll-Up Door Co. team works with clients to ensure safe loading dock areas while our service technicians confirm doors and dock equipment are running properly.
 
  • 24 hours, 7 days a week, 365 days a year Availability
  • Expansive Inventory
  • Large Retailer
  • Most Trusted in the Market
  • One Customer – One Contact for All Service Needs
  • Over 35 years of experience
  • Trained and Certified Technicians
 
Call American Roll-Up Door Co. today or connect with us online to discover why we are Florida’s most reliable distributor of dock seals and shelters.

Jacksonville, FL(904) 695‐0950
Orlando, FL(407) 857‐2427
Tampa, FL(813) 643‐7000

Tuesday, April 20, 2021

Orlando, Florida's Leading Loading Dock Equipment, Commercial Door and Service Provider

American Roll-Up Door Co., a division of DuraServ, is an authorized distributor and the leading service provider for APS, Kelley, and Serco loading dock equipment, and Dynaco and Hormann commercial doors in Orlando, Florida. We deliver high performance products with exceptional customer service.


Call American Roll-Up Door Co. today at (813) 643‐7000 or connect with us online for guidance in choosing the leading commercial loading dock equipment and doors.
 

Trust the Professionals at American Roll-Up Door Company

  • 24 hours a day, 7 days a week, and 365 days a year availability.
  • On call emergency loading dock and commercial door service.
  • Expertly trained service technicians – some with over 25 years of experience.
  • OEM (Original Equipment Manufacturer) Parts and Accessories
  • Planned Maintenance Program
 

Loading Dock and Commercial Door Applications

 

American Roll Up Door Company's Complete Line of Loading Dock Equipment and Commercial Doors


Commercial doors improve operational efficiency, safety, and reliability. American Roll-Up Door Co. carries high-quality rolling steel doors and high-speed doors
 
Dock levelers and lifts are solutions to correct the height difference between loading dock and trucks.
 
 
Dock seals and shelters offer loading dock systems efficient sealing to protect against the elements and maintain internal temperatures.
 
 
Loading dock safety equipment secures the working area, protecting personnel and equipment from accidents.
 
 
Industrial fans improve air movement in the working environment and protect product and equipment quality.
 
  • Serco ATEC HVLS Fans
  • Serco ATEC Fan
  • Kelley ATEC HVLS Fans
  • C-Class Commercial Fan
 

Orlando, Florida’s Most Reliable Loading Dock Equipment Dealer, Commercial Door Distributer and Service Provider


American Roll-Up Door Co., a division of DuraServ, designs, supplies, installs, and services loading dock equipment and commercial doors door in BradentonLakelandSarasotaSt. Petersburg, and Orlando, Florida.
 
American Roll-Up Door Co. is a one-stop-shop for loading dock equipment and commercial doors. Count on us to ensure stability and functionality in your commercial facilities.
 
Call American Roll-Up Door Co. today at (813) 643‐7000 or connect with us online to discover why we are Orlando, Florida's most reliable loading dock equipment dealer, commercial door distributor and service provider.

Wednesday, July 8, 2020

Common Issues Why Your Loading Dock Door Gets Stuck in Jacksonville, FL


The loading dock door is one of the vital pieces of equipment in a loading dock system. This system has been engineered to ensure the efficiency and profitability of the facility and to prevent the Jacksonville Roll-Up Door Repair.

However, this is not always the situation because as mechanical equipment malfunctions, which adversely affects the proficiency of the warehouse industry where Jacksonville Dock Repair and Jacksonville Dock Leveler Repair are indispensable.

What is a loading dock?
It is a warehouse loading and unloading platform that serves as a shortcut for the storage and distribution of goods. 



Types of Doors Used in the Loading Dock

In Florida, the most popular distributor that offers high-quality and durable loading dock doors is the American Roll-Up Door Co., a division of DuraServ Corp. 

We provide the best quality commercial doors in Orlando, Tampa, and Jacksonville as well as in the surrounding areas. We have the experience to match the right door with our clients’ commercial property needs as well as the corresponding Jacksonville Door Repair. We distribute the best quality commercial rolling steel and high-performance dock doors

Apart from that, we cater to the needs of our clients 24/7 for parts and service needs. 

Our products are the following:
Doors Used in the Loading Dock
  • Cornell ESD10 Service Door
  • Cornell Rolling Fire Doors
  • Cornell Thermiser Insulated Rolling Door ESD20
  • ASTA Commercial Sheet Door Series 200 
  • Clopay 3200 Insulated Sectional Door  
  • Cloplay 524 Sectional Door
  • CHI 3250 Non-Insulated Ribbed Steel Door
We carry the Jacksonville Garage Door with the corresponding Jacksonville Garage Door Repair.

Top reasons why your loading dock door may malfunction

One of the common reasons for loading dock doors to malfunction is they sometimes jam, and as a result interferes with the regular operation of a facility.  Contact Jacksonville Overhead Door Repair or Jacksonville Dock Plate Repair.
  
1. Power Disruption – when the main power of the facility is cut off.
2. Defective Section Panel – When one of the door sections is loose, it will hinder the smooth operation of the roll-up door. 
3. Defective door parts – with wear and tear, the dock door and the defective gears will start to jam.
4. Lack of maintenance – when the dock door lacks lubrication, it will start to jam. Without regular inspection and maintenance parts will start misaligning.

These issues are just a few of the many loading dock door malfunctions and the only solution is regular maintenance and repair schedules.



Things to do to Resolve the Loading Dock Door Issues

To address the issues of your loading dock door, it would be wise to contact the services of the American Roll-Up Door Co., a division of DuraServ Corp.

We have a wide array of high-end products and Professional Technicians that are skilled in loading dock door installations. We highlight our best services like the Tampa Loading Dock Repair.

For any concerns, you may contact us through the following telephone numbers:
  • Jacksonville - (904) 6950950
  • Orlando - (407) 8572427
  • Tampa - (813) 6437000

You may contact us with your rollup door service request, or you may also send your service request

Our service centers are always available to serve you better in the following areas in Jacksonville, Orlando, and Tampa FL servicing all of the Greater Tampa Bay areas including Lakeland, Sarasota, Bradenton, Tampa, St. Petersburg


Tuesday, July 7, 2020

Reasons Why You Should Invest In Insulated Rolling Door in Orlando, FL




Whether you are a facility manager with many years of door know-how or a simple business owner who is just curious about how insulated roll-up doors may help your commercial business, here are some fundamentals on how our Orlando roll-up doors works, its benefits, and applications that would ideally suit best for any business in Orlando, FL.      

At American Roll-Up Door Company, a division of DuraServ, loading dock products and services are the foundation of our business, they’re not all we offer. We also provide a wide range of products for our Orlando’s residential garage door and commercial doors, and one type that has been highly beneficial for many commercial businesses is an insulated rolling door, one of many Orlando’s commercial door products we can help you source.    


A rolling door, or commonly known as the roll-up door is a type of door consisting of many horizontal slats either aluminum, stainless steel, or galvanized steel hinged together in an overhead coil. Invented way back sometime around the 1920s, initially, roll-up doors were meant for garage doors in homes with the simple idea that doors can also open up and out of the way, allowing more room around the entrance of the garage. ​

American Roll-Up Door Co., a Division of DuraServ, provides the best quality Orlando commercial doors to the Jacksonville, Tampa, and Orlando and surrounding areas. Whether your commercial door interests lie in energy efficiency, fire protection, functionality, or aesthetic appearance; the professionals at American Roll-Up Door Co. has the experience to match the right door with your commercial property needs.

One of its best insulated rolling door models, the Cornell Thermiser® Insulated Rolling Door ESD20, ideally suited for business applications where temperature control, energy efficiency, protection, and cost savings are its top priorities.

Commonly found in business applications such as schools, universities, health care facilities, bars and restaurants, parking areas, pharmacies and retail.
    

Why choose Insulated Rolling Door for your business, its benefits, and its applications?

DuraServ, doors product have been designed and engineered with certain specifications and functionalities, while our insulated rolling doors have their benefits for several applications making your investment worth more than you expected.     

Unlike any ordinary door, insulated rolling doors are one of a kind, offering extra benefits such as climate control, product protection, energy efficiency, and even reducing noises. 

Significantly important for buildings or establishments located in harsh extreme climates, for facilities that have goods or items in need of extra care and protection.

Reason No. 1: Climate Control.
Climate controlled facilities or warehouses have standard temperature requirements to keep their items in good condition.

Insulated doors are perfect for these climate-controlled environments, and by insulating your rolling doors you are creating an environmental separation between the external and internal in your facility or warehouse. 

Beneficially, climate control saves the company added expenses through energy efficiency.       

The Cornell Thermiser® Insulated Rolling Door ESD20 is equipped with advanced full-perimeter seal and insulated galvanized steel curtains that can reduce in air infiltration and thermal transference. It has a Flame Spread Index of 0 and a Smoke Developed Index of 10(ASTM E84). The slat has an R-value of 8.0 rate. 

An ideal choice for use in environments that require climate control, security, and durability: 
·         parking garages
·         heavy industrial applications
·         transportation and transit
·         auto dealer service centers

For your new insulated rolling door installation needs, our Orlando Overhead Door and Orlando Sectional Door Design Teams can work with your architects to design your commercial entrances and exits from the ground up for maximum efficiency and safety. 

Reason No. 2: Energy Efficient
Insulated doors help regulate, control, and maintain the desired temperature for your building or establishment. They can help save more money on electrical costs of heating systems and air conditioners by not letting them work as hard, with less energy. Less energy equals lower energy bills and company savings.

The Thermiser® Insulated Rolling Door ESD20  is engineered with aluminum in the mill, clear and color anodized, built-in stainless steel - 300 series in #4 finish exterior openings, where it can manage and maintain different temperatures on each side of the door if necessary. 

Suitably best for business applications where temperature control, hygiene and sanitation control, and big cost savings are of great importance such as:
·         refrigeration and cold storage
·         food and beverage
·         pharmaceuticals
·         health care facilities 

Our Orlando Door Service Team is factory trained and fully qualified service technicians, some with 25 years of door experience will work 24/7 around the clock to keep your doors running.

Reason No. 3: Protection
Products or items need to be protected from harmful environmental elements such as heat, moisture, and humidity. With insulated doors, these products or items will be secured from the harm of unstable temperature changes and other environmental elements to prevent contamination and spoilage of your products or items. 

If unprotected from irreversible damage to your property, or product such as from, molding, shrinking, melting, or freezing, and company profit loss.    

Additionally, with insulated roll-up doors’ built with materials like galvanized steel, stainless steel, or aluminum, they can provide the best security for your facility against thieves and unwanted persons.

Its heavy-duty protection with its fortified locks and safety measures safeguards the entry and accessibility against all types of threats including burglary and fire hazards.

Cornell Thermiser® ESD20 rolls up compactly, offers superior protection against the elements, and improves security. Meets a maximum operational wind load of 20 PSF, requires little to no maintenance, and can deliver a low life cycle cost. 

Perfect choice for business applications when located in extreme climate, or during seasonal storms, and hurricanes. 
·         manufacturing
·         high-security facilities
·         heavy industrial applications
·         energy-efficient facilities

Our Service Areas in Orlando Wind loaded Doors and Orlando Hurricane Doors has been providing Central and Northern Florida with all their Commercial Door and Dock service needs since 1981. Headquartered in Orlando, Florida with branch offices in both Tampa and Jacksonville

Reason No. 4: Reducing External Noise
Another reason to invest in an insulated roll-up door is that it promotes a safer working environment.

This extra benefit is perfect for facilities or buildings having a noisy industrial area or near a busy street. By sealing off every nook and cranny of a doorway it reduces and stops the creeping noise when entering your premises or working area.

Cornell Thermiser® is designed with 30 STC (Sound Transmission Class) rating for its curtain and 18 STC for the entire assembly, provides a full perimeter seal of these energy-efficient doors, and also reduces the sound transmission compared to non-insulated rolling doors.


Best for business establishments who prioritize privacy, security, and space-savings such as: 
·         hospitals
·         government offices
·         schools and universities
·         retail
·         bar and restaurant

Our Orlando Fire Door Team has a full fleet of service and installation trucks and fully stocked warehouse, ready to take your call on a 24/7 schedule. 


Key Highlights:
·         Material Built: Aluminum-mill/clear/color anodized; Stainless steel: 300 series- #4 finish 
·         Operational Wind Load: 20 PSF
·         Sound Transmission Class (STC): Curtain -30/Assembly- 18
·         Cycles: 50,000 Cycles (Standard)
·         Safety Entrapment Protection Device: Available
·         Rolling Door Protector: Available
·         Curtain: Galvanized Steel with GalvaNex™ Polyester Enamel Finish
·         Bottom Bar: Extruded Aluminum-Width is less than 24'5"/ Steel-Width is greater than 24'5"
·         Coating: SpectraShield® Powder Coating- more than 180 colors available

If you are ready to make that insulated door decision happen, or you just want to know about our Cornell Thermiser® Insulated Rolling Door ESD20, you can contact us at Jacksonville - (904) 6950950, Orlando - (407) 8572427, Tampa - (813) 6437000.

American Roll-Up Door Co., a division of DuraServ, the largest distributor in the world for the leading manufacturers of dock equipment and hi-speed doors has been servicing all of North Florida for 39 years including St. Augustine, Fernandina Beach, Orlando, Gainesville, Lake City.


Being the One-Stop-Shop for Commercial door and loading dock equipment includes 24/7 Parts and Service:
·         Full fleet of service and installation trucks
·         Fully stocked warehouse
·         Team of factory trained and fully qualified service technicians

OEM Parts and Accessories
·         Minimize Downtime
·         Maximize Productivity
·         Stocked Inventory
·         Parts Availability

Planned Maintenance Program 
·         Protect Your Investment
·         Reduce Lifetime Ownership Costs

You can make a service request or you can visit our service areas in Jacksonville, Orlando, and Tampa FL.

To learn more about us, check-out our website